9/16/2023 0 Comments Rosette weld plateThough weld shrinkage cannot be prevented, it can be controlled by following these steps:Īvoid overwelding. Design and welding should be addressed to minimize this sort of warping. When the weld shrinks along its length, it causes base metal to twist around the weld ( Figure 3). When the weld shrinks across its width, it causes groove welds to ?wing-up? or fillet welds to close up ( Figure 2). Stainless steels are also more susceptible because they have greater thermal expansion and lower thermal conductivity than carbon steels. Thinner material is more susceptible to this because it has less stiffness. This restraint creates high-residual tensile stress that causes the weld to act like a stretched rubber band, with the workpiece holding the ends ( Figure 1).įor this reason, when the clamps that hold the workpiece are removed the base metal is allowed to move (or spring back) and the part is distorted. The weld wants to shrink as it cools to room temperature, but is restrained from doing so by the adjacent cold base metal. Lubricants, Coolants, Metalworking Fluids.Computerized Maintenance Management Systems.Abrasives, Belts, Brushes, Grinding Wheels.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |